Please read this special announcement about the discontinuation of Servoflo's distribution business
AP & AG Fujikura Pressure Sensor Overview
- Pressure Medium: Air/Gas
- Sensor Type: Gauge
- Supply Voltage: Under 5V
- Output Signal: Voltage, Digital
- Pressure Range: 3-300 psi
- Kind: Board Level
The AP/AG pressure sensor series from Fujikura is composed of a silicon piezeoresistive pressure sensing chip and a signal conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature-compensated, calibrated and finally converted to digital data that is proportional with the applied pressure. Gauge pressure sensor. The AG version is in a surface mount package. Pressure ranges include: 25 kPa, 50 kPa, 100 kPa, 200 kPa, 500 kPa and 1 MPa. 3 models are available: AP2/AG2 with compensated analog output, AP3/AG3 analog output with threshold detection, and AP4/AG4 with a digital output.
Features
- 3 mm or 6 mm pressure port for AG models, surface-mount
- 3 mm or 6 mm port, dual-in-line package AP, barbed port version available (APB2)
- Various pressure ranges from 0-25 kPa up to 0-1000 kPa, depending on model
- Pressure type: Gauge pressure / Gauge negative pressure
- Pressure media: non-corrosive gases
- Supply voltage (constant voltage): 5 +/-0.25 VDC or 3.3VDC or 3.0 VDC
- Accuracy of ±1.5% FS for 5.0 VDC or 3.3 VDC versions or ±2.0% FS for 3.0 VDC version
| AP Series Smooth Port (DIP) | AP Series Barbed Port (DIP) | AG Series 6 mm port (SMT) |
 |
 |
 |
Typical Uses
- Industrial instrumentation
- Flow measurements
- HVAC applications
- Non-invasive blood pressure monitor
- Deep vein thrombosis
- Oxygen concentrators
- Air mattresses
- Pneumatic devices
