Please read this special announcement about the discontinuation of Servoflo's distribution business
Siargo offers a wide range of off-shelf mass flow sensors to serve today's increasing demands of flow measurement, monitoring and control in energy, medical, food & beverage, machinery, environmental and many other industries.
13 Items found
The FS5002 are mass flow sensors for gas. They come in various calibrations from 50 sccm up to 1000 sccm with both analog and digital outputs.
The FS4100 are general-purpose mass flow sensors with various ranges from 2 SLPM up to 50 SLPM, with analog and digital outputs.
The FS1100 sensors measure the mass flow rates with a full scale up to 250 SLPM with a dynamic range of 100:1, and a temperature measurement of -20°C to 85°C. It has a maximum pressure rating of 2 bar (30 psi). Flow range selections include reverse to forward flow rates.
The MF/FS4308 mass flow sensors are for general purpose gas flow monitoring and control applications. This series covers a wide dynamic flow range with a working pressure rating of up to 1 MPa, and a temperature range from -10°C to 55° C.
The MF/FS4700 mass flow sensors are for general purpose gas flow monitoring and control applications. This series covers a wide dynamic flow range with a working pressure rating of up to 1 MPa, and a temperature range from -10°C to 55° C.
The MF/FS4000 mass flow sensors are manufactured using Siargo's proprietary MEMS flow sensor and packaging technology. The products are designed for reliability with excellent performance in targeted applications. The sensors are housed in 3 mm and 8 mm pipes with maximum flow rates of 5 SLPM and 50 SLPM.
The FS4001 mass flow sensors are manufactured using Siargo's proprietary MEMS flow sensor and packaging technology. The sensors are specially designed for low flow rates from 0-30 sccm up to 0-1000 sccm. With a high overpressure of 5 bar (73 psi), the FS4001 can be used in a wide range of applications including instrumentation (such as mass spectrometry), leak detection, process control, gas flow metrology and medical applications. The FS4001 requires a power supply of 8-18 VDC and provides an analog (0.5 to 4.5 VDC) and/or digital user interface (RS232). The calibration is generally performed with nitrogen at 20 °C and 101.325 kPa pressure rating. Calibration with other gases and conditions is available upon request.
The FS5001L mass flow sensors are manufactured using Siargo's proprietary MEMS flow sensor and packaging technology. The sensors are specially designed for flow rates up to 6 SLPM. The FS5001B can be used in a wide range of applications including mass flow metering for process control, leak detection, HVAC, gas flow metrology, and medical applications. The FS5001L requires a power supply of 8-24 VDC and provides an analog (0.5 to 4.5 VDC) and/or digital user interface I2C. Special calibrations are available upon request.
The FS6122 is a medical respiratory sensor to measure from -250 to +250 SLPM with a linear analog output or I2C output. A gauge pressure sensor is integrated into the FS6122 with a range of -5 to +40 cc H2O with a linear analog or I2C output.
The FS7002 are mass flow sensors designed to detect filter clogging. The sensors are designed for open space air flow measurement for monitoring the airflow status behind any air filter. The air velocity passes through the sensor via a specially designed venturi channel to proivde the stability of the air flow for the measurement. The compact design of the sensor provides easy installation and minimal obstruction of the air pathway. Typical applications include but are not limited to filter clog sensing in an intelligent air filter in an LCD projector and other electronics products, ceiling filter fans modules, ventilation duct flow or fan motor status.
The FS8001 mass flow sensors have a fast response time of 5 ms and are designed for filter clogging. The FS8001 is for 0-500 sccm and has a nonlinear analog voltage. The FS8003 is for 0-6 SLPM.
The AM1000 Series is designed for air velocity measurement in a closed conduit or open space, with optional temperature and humidity sensing data (AM1100 model). The sensing elements are made on a specially designed MEMs structure that enhances the measurement accuracy and response time while lowering the power consumption. The RS485 (Modbus) and Bluetooth LE options are ready for networking or remote communication. This format is ideal for residential HVAC or smart home applications.
The FS1015CL mass flow sensors are manufactured using proprietary MEMS flow sensor and packaging technology. The sensors are specially designed for medical equipment such as ventilators for flow monitoring and control. 2 flow rates are available, 0-100 SLPM and 0-150 SLPM. The compact package design enables a large dynamic flow range with a pressure drop of 1300 Pa (about 13 cm H2O). This package withstands a maximum pressure of 29 psi without compromising performance.
