Oxygen Concentrators & Conservers

Oxygen Concentrators & Conservers

Oxygen concentrators take in air, filter out impurities and other gases, and delivery pure oxygen to patients who require oxygen therapy. Due to their critical function, these machines require highly accurate and consistent pressure sensors that can ensure precise and accurate control over treatment. There are two applications for pressure sensors. The first is breath detection, similar to the respirator application described above. The second is to monitor the pressure in the oxygen line, which typically runs between 30-40 psi. We also offer oxygen sensors that monitor the oxygen percentages delivered to the patient.

AL4 Series Gauge or Differential Pressure Sensor Digital Output 1% FS Accuracy

AL4 Series Gauge or Differential Pressure Sensor Digital Output 1% FS Accuracy

Properties
Pressure Medium: Air/Gas
Sensor Type: Gauge, Differential
Supply Voltage: Under 5V, 5V
Output Signal: Digital
Pressure Range: Under 4” H2O, 4” H2O to 3 psi
Kind: Board Level

The AL4 pressure sensor is a digital output low pressure sensor. It is composed of a silicon piezoresistive pressure sensing chip and a signal conditioning integrated circuit. 

Read more
AP2 & AG2 Series Calibrated Low Cost Pressure Sensor

AP2 & AG2 Series Calibrated Low Cost Pressure Sensor

Properties
Pressure Medium: Air/Gas
Sensor Type: Gauge
Supply Voltage: Under 5V, 5V
Output Signal: Voltage
Pressure Range: 3-300 psi
Kind: Board Level

This new ASIC sensor from Fujikura comes with a calibrated, temperature-compensated output in various pressure ranges from 0-25 kPa up to 0-1000 kPa. The most significant advantage of this part is the extremely high accuracy of 1.5% full-scale. 

Read more
AP3 & AG3 Series Calibrated Pressure Sensor With Threshold Detection

AP3 & AG3 Series Calibrated Pressure Sensor With Threshold Detection

Properties
Pressure Medium: Air/Gas
Sensor Type: Gauge
Supply Voltage: Under 5V, 5V
Output Signal: Voltage
Pressure Range: 3-300 psi
Kind: Board Level

This new ASIC sensor from Fujikura comes with a calibrated, temperature-compensated output in various pressure ranges from 0-25 kPa up to 0-1000 kPa. The most significant advantage of this part is the extremely high accuracy of 1.5% full-scale and the ability for threshold detection.  

Read more
AP4 & AG4 Series Gauge Digital Pressure Sensor

AP4 & AG4 Series Gauge Digital Pressure Sensor

Properties
Sensor Type: Gauge
Supply Voltage: Under 5V, 5V

The AP4/AG4 gauge pressure sensor series is composed of a silicon piezeoresistive pressure sensing chip and a signal conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature-compensated, calibrated and finally converted to digital data that is proportional with the applied pressure. 

Read more
FCX-MCXX Oxygen Sensor Module

FCX-MCXX Oxygen Sensor Module

The sensor module FCX-MCXX is a complete solution for measuring oxygen within the range of 0.1 - 25% or 0.2 - 95%. The sensor and electronics are integrated on one board. The MC module delivers a linearized analog output signal of 0-20 mA, 4-20 mA, or 0-10 VDC. Digital outputs of RS-232, RS-485 or I2C are available upon request.

Read more
FCX-MLXX Oxygen Sensor Module

FCX-MLXX Oxygen Sensor Module

The sensor module FCX-MLXX is a complete solution for measuring oxygen within the range of 0.1 - 25%. The sensor and electronics are integrated on one board. The module takes the signal directly from the sensor and amplifies it into a nonlinear but logarithmic 4-20 mA output.

Read more
HTC52 Series Pressure Sensor Has Wide Range of Options

HTC52 Series Pressure Sensor Has Wide Range of Options

Properties
Pressure Medium: Air/Gas
Sensor Type: Gauge, Differential
Supply Voltage: Under 5V, 5V
Output Signal: Voltage, Digital
Pressure Range: Under 4” H2O, 4” H2O to 3 psi, 3-300 psi
Kind: Board Level

The HTC52 Series is a miniature, robust pressure sensor with calibrated and temperature compensated SPI, I2C or analog output. A variety of output configurations, including resolution, sampling rate, output interface are available to provide a simple and ready to use solution for a wide range of applications. 

Read more
Oxygen Sensors from Fujikura

Oxygen Sensors from Fujikura

Today, Fujikura is the pioneer of the zirconium-based, current limiting oxygen sensors. This style of sensor has many advantages over other ways of measuring oxygen.

Read more
SM5XXX, 6XXX & 7XXX Ultra Low Pressure Sensors With Digital or Analog Output

SM5XXX, 6XXX & 7XXX Ultra Low Pressure Sensors With Digital or Analog Output

Properties
Pressure Medium: Air/Gas
Sensor Type: Gauge, Differential
Supply Voltage: Under 5V
Output Signal: Digital
Pressure Range: Under 4” H2O, 4” H2O to 3 psi
Kind: Board Level

The SM5XXX, SM6XXX, and SM7XXX are ultra low pressure MEMS sensor families offering state of the art pressure transducer technology and a CMOS mixed signal processing technology to produce a digital or analog, fully-conditioned, multi-order pressure and temperature-compensated sensor in JEDEC standard SOIC-16 packaging with dual ports (horizontal or vertical). 

Read more